Nt6 Fast Installer.zip
NT6 Fast Installer: A Faster and Easier Way to Install Windows 7 on a USB Drive
Do you want to install Windows 7 on a USB drive without using the setup.exe? Do you want to boot Windows 7 directly from a USB drive without installing it on your internal hard disk? Do you want to save time and effort by using a simple and fast method to install Windows 7 on a USB drive? If you answered yes to any of these questions, then you might want to try NT6 Fast Installer. This is a tool that allows you to install Windows 7 on a USB drive in minutes using imagex and bcdboot commands. In this article, we will show you how to use NT6 Fast Installer to install Windows 7 on a USB drive and what are the advantages and disadvantages of this method.
nt6 fast installer.zip
What is NT6 Fast Installer?
NT6 Fast Installer is a tool that was created by fujianabc from reboot.pro forum. It is based on the idea that the fastest way to install Windows 7 (or any NT 6.x OS) is by using imagex and bcdboot commands instead of the setup.exe. Imagex is a command-line tool that enables you to capture, modify, and apply file-based disk images for rapid deployment. Bcdboot is a command-line tool that enables you to quickly set up a system partition, or to repair the boot environment located on the system partition. By using these two commands, you can copy the Windows 7 files from the installation DVD or ISO file to the USB drive and make it bootable in a few steps.
What are the advantages of NT6 Fast Installer?
NT6 Fast Installer has some advantages compared to the original setup.exe method. Some of the advantages are:
It is faster and easier. You can install Windows 7 on a USB drive in minutes instead of hours. You don't need to go through the setup wizard or enter any product key or activation code.
It is more flexible and customizable. You can choose which edition of Windows 7 you want to install (Home, Professional, Ultimate, etc.) by selecting the index number from the install.wim file. You can also modify the install.wim file before copying it to the USB drive if you want to add or remove any features or drivers.
It is more portable and convenient. You can boot Windows 7 directly from the USB drive without installing it on your internal hard disk. You can use it on any system that supports USB booting. You can also use it as a backup or recovery tool in case your internal hard disk fails or gets corrupted.
What are the disadvantages of NT6 Fast Installer?
NT6 Fast Installer also has some disadvantages compared to the original setup.exe method. Some of the disadvantages are:
It requires some technical knowledge and skills. You need to know how to use command-line tools and how to work with disk images and partitions. You also need to be careful not to make any mistakes or typos that could damage your system or data.
It does not support USB 3.0 booting. You can only use it on a USB 2.0 port. If you want to use it on a USB 3.0 port, you need to add some USB 3 drivers manually.
It does not support UEFI booting. You can only use it on a legacy BIOS system. If you want to use it on a UEFI system, you need to enable legacy mode or CSM in your BIOS settings.
How can you use NT6 Fast Installer?
If you want to use NT6 Fast Installer, you need to have the following items:
A USB drive (USB hard disk or flash drive) with at least 8 GB of free space.
A Windows 7 installation DVD or ISO file.
A computer with Windows XP or later OS installed.
The NT6 Fast Installer tool which you can download from here.
Once you have these items, you can follow these steps:
Extract the NT6 Fast Installer tool from the zip file and run installer.cmd as administrator.
Select your language and press Enter.
Select your source path where your Windows 7 installation DVD or ISO file is located and press Enter.
Select your target path where your USB drive is located and press Enter.
Select your index number which corresponds to the edition of Windows 7 you want to install (e.g. 5 for Ultimate) and press Enter.
Wait for the process to finish. It will take several minutes depending on your system speed and USB drive speed.
Eject your USB drive safely and connect it to the target system where you want to boot Windows 7 from.
Switch on the target system and select the USB drive as the boot device in the BIOS boot menu.
Now allow the system to boot to Windows 7 directly from the USB drive.
NT6 Fast Installer is a tool that enables you to install Windows 7 on a USB drive in minutes using imagex and bcdboot commands. It has some advantages such as being faster, easier, more flexible, more portable and more convenient than the original setup.exe method. It also has some disadvantages such as requiring some technical knowledge and skills, not supporting USB 3.0 booting, not supporting UEFI booting and potentially being risky if not used properly. If you want to try this method, make sure you have all the required items and follow all the steps carefully. NT6 Fast Installer is a tool that can save you time and effort if you want to install Windows 7 on a USB drive. 6c859133af